Custom Rabbit TWEAK R ELISA

首页 /产品中心/ 兔ELISA Kit / Custom Rabbit TWEAK R ELISA

Custom Rabbit TWEAK R ELISA

RayBio® Custom Rabbit TWEAK Receptor (TNFRSF12A) ELISA Kit. 5 - 7 week lead time.

CODE: ELL-TWEAKR-1

Number of Plates:

Antigen Information

Target Species:

Rabbit

Assay Format

Sensitivity:

Need more sensitivity? Check out the new IQELISA™ kit for this target. Still not enough? Then your answer is our Ultrasensitive Biomarker Testing Service powered by Simoa™ technology.

Specificity:

The antibody pair provided in this kit recognizes Rabbit TWEAK Receptor (TNFRSF12A)

Number of Targets Detected:

Species Detected:

Rabbit

Design Principle:

Sandwich-based

Method of Detection:

Colorimetric

Quantitative/Semi-Quantitative:

Quantitative

Solid Support:

96-well Microplate

Product Specifications

Size:

1, 2, or 5 x 96-Well Strip Microplate Kit

Product Features

Additional Notes

Strip plates and additional reagents allow for use in multiple experiments
Quantitative protein detection
Establishes normal range
The best products for confirmation of antibody array data

Application Notes

Kit Components

Pre-Coated 96-well Strip Microplate
Wash Buffer
Stop Solution
Assay Diluent(s)
Lyophilized Standard
Biotinylated Detection Antibody
Streptavidin-Conjugated HRP
TMB One-Step Substrate

Other Materials Required

Distilled or deionized water
Precision pipettes to deliver 2 µl to 1 µl volumes
Adjustable 1-25 µl pipettes for reagent preparation
100 µl and 1 liter graduated cylinders
Tubes to prepare standard and sample dilutions
Absorbent paper
Microplate reader capable of measuring absorbance at 450nm
Log-log graph paper or computer and software for ELISA data analysis

Protocol Outline

Prepare all reagents, samples and standards as instructed in the manual.
Add 100 µl of standard or sample to each well.
Incubate 2.5 h at RT or O/N at 4°C.
Add 100 µl of prepared biotin antibody to each well.
Incubate 1 h at RT.
Add 100 µl of prepared Streptavidin solution to each well.
Incubate 45 min at RT.
Add 100 µl of TMB One-Step Substrate Reagent to each well.
Incubate 30 min at RT.
Add 50 µl of Stop Solution to each well.
Read at 450 nm immediately.

Storage/Stability

May be stored for up to 6 months at 2° to 8°C from the date of shipment. Standard (recombinant protein) should be stored at -20°C or -80°C (recommended at -80°C) after reconstitution. Opened Microplate Wells or reagents may be store for up to 1 month at 2° to 8°C. Return unused wells to the pouch containing desiccant pack, reseal along entire edge. Note: the kit can be used within one year if the whole kit is stored at -20°C.

Usage

This product is furnished for LABORATORY RESEARCH USE ONLY.
Not for diagnostic or therapeutic use.